US HS codes named by an active AD/CVD order

200 codes, each with the Commerce orders that list it, the scope documents where coverage is actually decided, and the Section 301 / 232 / surtax records that name the same code. Read straight from the data as of 2026-10-22.

An HTS number on an order's case page does not establish that a product is covered — the written scope of the order does. These pages give a broker the documents to read, never a verdict. 1042 codes qualify in total; the 200 with the most published evidence are shown first.

Chapter 29

  • HS 2933.61.00 — Compounds containing an unfused triazine ring (whether or not hydrogenated) in the structure: Melamine (11 active orders)

Chapter 38

Chapter 39

  • HS 3923.21.00 — Sacks and bags (including cones): Of polymers of ethylene (11 active orders)
  • HS 3923.90.00 — Articles nesoi, for the conveyance or packing of goods, of plastics: Other (10 active orders)

Chapter 40

  • HS 4011.20.10 — Of a kind used on buses or trucks: Radial (5 active orders)
  • HS 4011.20.50 — Of a kind used on buses or trucks: Other

Chapter 48

  • HS 4811.90.90 — Other paper, paperboard, cellulose wadding and webs of cellu (4 active orders)
  • HS 4811.90.80 — Weighing over 30 g/m² (8 active orders)
  • HS 4819.30.00 — Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or: Sacks and bags, having a base of a width of 40 cm or more (11 active orders)
  • HS 4819.40.00 — Sacks and bags, nesoi, including cones, of paper, paperboard, cellulose wadding or webs of cellulose fibers: Other sacks and bags, including cones (11 active orders)
  • HS 4802.62.10 — Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non perforated punch-cards and punch tape paper, in rolls or rectangular (including square) sheets, of any size, other than paper of heading 4801 or 4803; hand-made paper and paperboard: Writing and cover paper (9 active orders)
  • HS 4802.62.20 — In sheets with one side not exceeding 435 mm and the other s: Drawing paper (9 active orders)
  • HS 4802.62.30 — In sheets with one side not exceeding 435 mm and the other s (9 active orders)
  • HS 4802.69.10 — Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non perforated punch-cards and punch tape paper, in rolls or rectangular (including square) sheets, of any size, other than paper of heading 4801 or 4803; hand-made paper and paperboard: Writing and cover paper (9 active orders)

Chapter 55

  • HS 5503.20.00 — Of nylon or other polyamides: Of polyesters (11 active orders)

Chapter 68

  • HS 6810.11.00 — Articles of cement, of concrete or of artificial stone, whether or not reinforced: Building blocks and bricks (9 active orders)
  • HS 6810.91.00 — Articles of cement, of concrete or of artificial stone, whether or not reinforced: Prefabricated structural components for building or civil engineering (9 active orders)
  • HS 6810.99.00 — Articles of cement (other than tiles, flagstones, bricks and similar arts.), of concrete or artificial stone, nesoi (9 active orders)

Chapter 72

  • HS 7225.99.00 — Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, nesoi: Other (22 active orders)
  • HS 7226.99.01 — Alloy steel, width less than 600mm, flat-rolled products further worked than cold-rolled, nesoi: Other (21 active orders)
  • HS 7212.50.00 — Iron/nonalloy steel, width less th/600mm, flat-rolled products, plated or coated nesoi: Otherwise plated or coated (21 active orders)
  • HS 7212.40.10 — Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coat: Of a width of less than 300 mm (18 active orders)
  • HS 7212.40.50 — Painted, varnished or coated with plastics: Other (18 active orders)
  • HS 7210.90.90 — Other (27 active orders)
  • HS 7210.70.30 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated: Not coated or plated with metal and not clad (11 active orders)
  • HS 7225.19.00 — Alloy silicon electrical steel (other than grain-oriented), width 600mm+, flat-rolled products (18 active orders)
  • HS 7226.19.10 — Flat-rolled products of other alloy steel, of a width of less than 600 mm: Of a width of 300 mm or more (13 active orders)
  • HS 7226.19.90 — Flat-rolled products of other alloy steel, of a width of less than 600 mm: Of a width of less than 300 mm (13 active orders)
  • HS 7215.90.50 — Other (13 active orders)
  • HS 7228.60.60 — Other bars and rods: Not cold-formed (16 active orders)
  • HS 7208.53.00 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad,: Of a thickness of 3 mm or more but less than 4.75 mm (20 active orders)
  • HS 7208.90.00 — Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, nesoi, not clad/plated/coated: Other (20 active orders)
  • HS 7211.14.00 — Iron/nonalloy steel, width less th/600mm, hot-rolled flat-rolled products, nesoi, w/thick of 4.75mm or more, not clad/plated/coated: Other, of a thickness of 4.75 mm or more (10 active orders)
  • HS 7226.91.50 — Flat-rolled products of other alloy steel, of a width of less than 600 mm: Of a thickness of 4.75 mm or more (16 active orders)
  • HS 7211.90.00 — Iron/nonalloy steel, width less th/600mm, flat-rolled further worked than cold-rolled, not clad, plated or coated: Other (11 active orders)
  • HS 7225.40.70 — Other, not further worked than hot-rolled, not in coils (9 active orders)
  • HS 7226.91.70 — Of a thickness of less than 4.75 mm: Of a width of 300 mm or more (9 active orders)
  • HS 7226.91.80 — Flat-rolled products of other alloy steel, of a width of less than 600 mm: Of a width of less than 300 mm (9 active orders)
  • HS 7217.90.10 — Wire of iron or nonalloy steel: Coated with plastics (8 active orders)
  • HS 7217.90.50 — Other (8 active orders)
  • HS 7229.90.10 — Other: Flat wire (8 active orders)
  • HS 7228.60.80 — Other bars and rods: Cold-formed (8 active orders)
  • HS 7208.40.60 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad,: Of a thickness of less than 4.75 mm (19 active orders)
  • HS 7211.19.15 — Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or: Of high-strength steel (9 active orders)
  • HS 7211.19.20 — Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or: Of a thickness exceeding 1.25 mm (9 active orders)
  • HS 7211.19.45 — Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or: Of high-strength steel (9 active orders)
  • HS 7211.19.60 — Other: Pickled (9 active orders)
  • HS 7211.19.75 — Other (9 active orders)
  • HS 7225.11.00 — Flat-rolled products of other alloy steel, of a width of 600 mm or more: Grain-oriented (9 active orders)
  • HS 7226.11.10 — Flat-rolled products of other alloy steel, of a width of less than 600 mm: Of a width of 300 mm or more (9 active orders)
  • HS 7226.11.90 — Flat-rolled products of other alloy steel, of a width of less than 600 mm: Of a width of less than 300 mm (9 active orders)
  • HS 7215.90.10 — Other: Not cold-formed (13 active orders)
  • HS 7227.20.00 — Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel: Of silico-manganese steel (13 active orders)
  • HS 7227.90.60 — Other (13 active orders)
  • HS 7217.30.15 — Plated or coated with other base metals: Flat wire (7 active orders)
  • HS 7210.49.00 — Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with zinc (other than electrolytically), not corrugated (8 active orders)
  • HS 7210.70.60 — Painted, varnished or coated with plastics: Other (8 active orders)
  • HS 7210.90.60 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated: Electrolytically coated or plated with base metal (7 active orders)
  • HS 7210.90.10 — Other: Clad (8 active orders)
  • HS 7210.30.00 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated: Electrolytically plated or coated with zinc (23 active orders)
  • HS 7210.41.00 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated: Corrugated (7 active orders)
  • HS 7210.61.00 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated: Plated or coated with aluminum-zinc alloys (7 active orders)
  • HS 7210.69.00 — Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with aluminum o/than aluminum-zinc alloy: Other (7 active orders)
  • HS 7212.20.00 — Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coat: Electrolytically plated or coated with zinc (7 active orders)
  • HS 7212.30.10 — Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coat: Of a thickness exceeding 0.25 mm or more (7 active orders)
  • HS 7212.30.30 — Otherwise plated or coated with zinc (7 active orders)
  • HS 7212.30.50 — Otherwise plated or coated with zinc (7 active orders)
  • HS 7212.60.00 — Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated (7 active orders)
  • HS 7215.90.30 — Other: Cold-formed (7 active orders)
  • HS 7217.20.15 — Plated or coated with zinc: Flat wire (7 active orders)
  • HS 7225.91.00 — Flat-rolled products of other alloy steel, of a width of 600 mm or more: Electrolytically plated or coated with zinc (7 active orders)
  • HS 7225.92.00 — Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, plated or coated with zinc (o/than electrolytically): Otherwise plated or coated with zinc (7 active orders)
  • HS 7221.00.00 — Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel (20 active orders)
  • HS 7213.91.30 — Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel: Not tempered, not treated and not partly manufactured (23 active orders)
  • HS 7208.40.30 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: Of a thickness of 4.75 mm or more (19 active orders)
  • HS 7208.51.00 — Other, not in coils, not further worked than hot-rolled: Of a thickness exceeding 10 mm (16 active orders)
  • HS 7208.52.00 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad,: Of a thickness of 4.75 mm or more but not exceeding 10 mm (14 active orders)
  • HS 7211.13.00 — Not further worked than hot-rolled: Universal mill plate (7 active orders)
  • HS 7225.40.30 — Other, not further worked than hot-rolled, not in coils (13 active orders)
  • HS 7214.91.00 — Iron/nonalloy steel, bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, w/rectangular (o/than square) X-section: Of rectangular (other than square) cross-section (9 active orders)
  • HS 7213.91.45 — Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel: Containing by weight 0.6 percent or more of carbon (10 active orders)
  • HS 7213.91.60 — Of circular cross section measuring less than 14 mm in diame: Other (10 active orders)
  • HS 7213.99.00 — Iron/nonalloy steel, nesoi, hot-rolled bars & rods, w/cir. x-sect. diam 14+mm or non-circ. x-sect., in irregularly wound coils, nesoi: Other (10 active orders)
  • HS 7208.27.00 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad,: Of a thickness of less than 3 mm (14 active orders)
  • HS 7208.10.15 — In coils, not further worked than hot-rolled, with patterns: Pickled (17 active orders)
  • HS 7208.10.30 — Other: Of a thickness of 4.75 mm or more (13 active orders)
  • HS 7208.10.60 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad,: Of a thickness of less than 4.75 mm (13 active orders)
  • HS 7208.25.30 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad,: Of high-strength steel (13 active orders)
  • HS 7208.25.60 — Of a thickness of 4.75 mm or more: Other (13 active orders)
  • HS 7208.26.00 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad,: Of a thickness of 3 mm or more but less than 4.75 mm (13 active orders)
  • HS 7208.36.00 — Other, in coils, not further worked than hot-rolled: Of a thickness exceeding 10 mm (13 active orders)
  • HS 7208.37.00 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad,: Of a thickness of 4.75 mm or more but not exceeding 10 mm (13 active orders)
  • HS 7208.38.00 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad,: Of a thickness of 3 mm or more but less than 4.75 mm (13 active orders)
  • HS 7208.39.00 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad,: Of a thickness of less than 3 mm (13 active orders)
  • HS 7208.54.00 — Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: Of a thickness of less than 3 mm (13 active orders)
  • HS 7211.19.30 — Other (3 active orders)
  • HS 7225.30.30 — Other, not further worked than hot-rolled, in coils (3 active orders)
  • HS 7225.30.70 — Other, not further worked than hot-rolled, in coils (3 active orders)
  • HS 7225.50.80 — Other, not further worked than cold-rolled (cold-reduced) (3 active orders)
  • HS 7226.92.50 — Flat-rolled products of other alloy steel, of a width of less than 600 mm: Of a width of 300 mm or more (3 active orders)
  • HS 7226.92.70 — Flat-rolled products of other alloy steel, of a width of less than 600 mm: Of a thickness not exceeding 0.25 mm (3 active orders)
  • HS 7226.92.80 — Flat-rolled products of other alloy steel, of a width of less than 600 mm: Of a thickness exceeding 0.25 mm (3 active orders)
  • HS 7225.50.60 — Flat-rolled products of other alloy steel, of a width of 600 mm or more: Of a thickness of 4.75 mm or more (1 active order)
  • HS 7222.11.00 — Other bars and rods of stainless steel; angles, shapes and sections of stainless steel: Of circular cross-section (7 active orders)
  • HS 7222.30.00 — Stainless steel, bars and rods, further worked than cold-formed or cold-finished, nesoi: Other bars and rods (8 active orders)
  • HS 7214.10.00 — Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, bu (6 active orders)
  • HS 7214.30.00 — Free-cutting steel, bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, n/coils, nesoi: Other, of free-cutting steel (13 active orders)
  • HS 7225.40.11 — Other, not further worked than hot-rolled, not in coils: Of tool steel (13 active orders)
  • HS 7225.40.51 — Other, not further worked than hot-rolled, not in coils: Of tool steel (13 active orders)
  • HS 7226.20.00 — Flat-rolled products of other alloy steel, of a width of less than 600 mm: Of high-speed steel (13 active orders)
  • HS 7226.91.05 — Flat-rolled products of other alloy steel, of a width of less than 600 mm: Of chipper knife steel (13 active orders)
  • HS 7226.91.15 — Flat-rolled products of other alloy steel, of a width of less than 600 mm: Of a width of 300 mm or more (13 active orders)
  • HS 7226.91.25 — Flat-rolled products of other alloy steel, of a width of less than 600 mm: Of a width of less than 300 mm (13 active orders)
  • HS 7214.20.00 — Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn: Concrete reinforcing bars and rods (18 active orders)
  • HS 7228.20.10 — Bars and rods, of silico-manganese steel: Not cold-formed (18 active orders)
  • HS 7228.30.80 — Of tool steel (other than high-speed steel) (18 active orders)
  • HS 7219.90.00 — Stainless steel, width 600mm+, flat-rolled products, nesoi, further worked than cold-rolled: Other (11 active orders)
  • HS 7220.90.00 — Stainless steel, width less th/600mm, flat-rolled products further worked than cold-rolled: Other (11 active orders)
  • HS 7220.20.10 — Flat-rolled products of stainless steel, of a width of less than 600 mm: Of a width of 300 mm or more (10 active orders)
  • HS 7220.20.60 — Of a width of less than 300 mm: Of a thickness exceeding 1.25 mm (10 active orders)

Chapter 73

  • HS 7306.30.50 — Other, welded, of circular cross section, of iron or nonallo (12 active orders)
  • HS 7304.39.00 — Iron (o/than cast) or nonalloy steel, seamless, not cold-drawn or cold-rolled, tubes, pipes and hollow prof., w/circular cross sect., nesoi: Other (13 active orders)
  • HS 7304.59.60 — Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel: Of heat-resisting steel (13 active orders)
  • HS 7304.59.80 — Other (13 active orders)
  • HS 7306.50.50 — Other, welded, of circular cross section, of other alloy ste (8 active orders)
  • HS 7312.10.30 — Stranded wire, ropes and cables: Other (23 active orders)
  • HS 7304.31.60 — Cold-drawn or cold-rolled (cold-reduced): Other (17 active orders)
  • HS 7305.31.60 — Longitudinally welded: Of alloy steel (6 active orders)
  • HS 7305.31.40 — Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sect: Of iron or nonalloy steel (6 active orders)
  • HS 7306.30.10 — Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly clo: Having a wall thickness of less than 1.65 mm (10 active orders)
  • HS 7304.51.50 — Cold-drawn or cold-rolled (cold-reduced): Other (13 active orders)
  • HS 7304.31.30 — Cold-drawn or cold-rolled (cold-reduced): Hollow bars (17 active orders)
  • HS 7326.90.86 — Other (6 active orders)
  • HS 7305.20.20 — Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sect: Threaded or coupled (8 active orders)
  • HS 7326.19.00 — Forged or stamped, but not further worked: Other (3 active orders)
  • HS 7305.11.10 — Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sect: Of iron or nonalloy steel (14 active orders)
  • HS 7304.29.10 — Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel: Threaded or coupled (11 active orders)
  • HS 7304.29.20 — Other (3 active orders)
  • HS 7304.29.31 — Of other alloy steel: Threaded or coupled (3 active orders)
  • HS 7304.29.41 — Other (3 active orders)
  • HS 7304.29.50 — Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel: Of iron or nonalloy steel (3 active orders)
  • HS 7304.29.61 — Alloy (other than stainless) steel, seamless tubing, of a kind used in drilling for oil or gas: Of other alloy steel (3 active orders)
  • HS 7305.20.40 — Casing of a kind used in drilling for oil or gas: Other (3 active orders)
  • HS 7305.20.60 — Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sect: Threaded or coupled (3 active orders)
  • HS 7305.20.80 — Casing of a kind used in drilling for oil or gas: Other (3 active orders)
  • HS 7306.29.10 — Of iron or nonalloy steel: Threaded or coupled (8 active orders)
  • HS 7306.29.20 — Other (3 active orders)
  • HS 7306.29.31 — Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly clo: Threaded or coupled (3 active orders)
  • HS 7306.29.41 — Other (3 active orders)
  • HS 7306.29.60 — Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly clo: Of iron or nonalloy steel (3 active orders)
  • HS 7306.29.81 — Other (3 active orders)
  • HS 7305.11.50 — Longitudinally submerged arc welded: Of alloy steel (4 active orders)
  • HS 7305.12.10 — Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sect: Of iron or nonalloy steel (4 active orders)
  • HS 7305.12.50 — Other, longitudinally welded: Of alloy steel (4 active orders)
  • HS 7305.19.10 — Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sect: Of iron or nonalloy steel (4 active orders)
  • HS 7305.19.50 — Other: Of alloy steel (4 active orders)
  • HS 7308.20.00 — Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example,: Towers and lattice masts (14 active orders)
  • HS 7306.50.10 — Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly clo: Having a wall thickness of less than 1.65 mm (5 active orders)
  • HS 7304.19.10 — Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel: Of iron or nonalloy steel (12 active orders)
  • HS 7304.19.50 — Alloy (other than stainless) steel, seamless line pipe used for oil or gas pipelines: Of other alloy steel (12 active orders)
  • HS 7307.99.50 — Other (10 active orders)
  • HS 7306.19.10 — Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly clo: Of iron or nonalloy steel (10 active orders)
  • HS 7306.19.51 — Other: Of alloy steel (10 active orders)
  • HS 7307.92.30 — Of alloy steel (except stainless steel): Sleeves (couplings) (10 active orders)
  • HS 7305.39.10 — Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sect: Of iron or nonalloy steel (10 active orders)
  • HS 7305.39.50 — Other: Of alloy steel (10 active orders)
  • HS 7317.00.65 — Iron or steel, nails, tacks, corrugated nails, staples & similar arts., of one piece construction, not made of round wire, nesoi: Other (9 active orders)

Chapter 76

  • HS 7606.12.30 — Of aluminum alloys: Not clad (24 active orders)
  • HS 7606.11.30 — Of aluminum, not alloyed: Not clad (30 active orders)
  • HS 7606.11.60 — Of aluminum, not alloyed: Clad (24 active orders)
  • HS 7606.12.60 — Of aluminum alloys: Clad (24 active orders)
  • HS 7606.91.30 — Of aluminum, not alloyed: Not clad (24 active orders)
  • HS 7606.91.60 — Of aluminum, not alloyed: Clad (24 active orders)
  • HS 7606.92.30 — Of aluminum alloys: Not clad (24 active orders)
  • HS 7606.92.60 — Of aluminum alloys: Clad (24 active orders)
  • HS 7607.11.90 — Rolled but not further worked: Other (24 active orders)

Chapter 82

  • HS 8206.00.00 — Tools of two or more of headings 8202 to 8205, put up in sets for retail sale (9 active orders)

Chapter 85

  • HS 8502.31.00 — No 2.5%2/ Free (A, AU, B, BH, C, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG): Wind-powered (14 active orders)
  • HS 8507.20.80 — Other lead-acid storage batteries
  • HS 8541.42.00 — Semiconductor devices (for example, diodes, transistors, semiconductor-based transducers); photosens: Photovoltaic cells not assembled in modules or made up into panels (15 active orders)
  • HS 8541.43.00 — Semiconductor devices (for example, diodes, transistors, semiconductor-based transducers); photosens: Photovoltaic cells assembled in modules or made up into panels (12 active orders)
  • HS 8501.71.00 — Electric motors and generators (excluding generating sets): Of an output not exceeding 50 W (10 active orders)
  • HS 8501.72.20 — Electric motors and generators (excluding generating sets): Of an output exceeding 750 W but not exceeding 75 kW (10 active orders)
  • HS 8501.72.30 — Electric motors and generators (excluding generating sets): Of an output exceeding 75 kW but not exceeding 375 kW (10 active orders)
  • HS 8501.72.90 — Of an output exceeding 50 W: Other (10 active orders)
  • HS 8501.80.10 — Electric motors and generators (excluding generating sets): Of an output not exceeding 75 kVA (10 active orders)
  • HS 8501.80.20 — Electric motors and generators (excluding generating sets): Of an output exceeding 75 kVA but not exceeding 375 kVA (10 active orders)
  • HS 8501.80.30 — Electric motors and generators (excluding generating sets): Of an output exceeding 375 kVA but not exceeding 750 kVA (10 active orders)
  • HS 8501.80.90 — Photovoltaic AC generators: Other (10 active orders)

Chapter 87

  • HS 8716.90.50 — Parts: Other (10 active orders)
  • HS 8708.70.45 — Road wheels and parts and accessories thereof (7 active orders)
  • HS 8708.70.60 — Parts and accessories of the motor vehicles of headings 8701 to 8705 (12 active orders)

Chapter 94

  • HS 9404.29.90 — Of other materials (6 active orders)
  • HS 9401.99.90 — Other (6 active orders)
  • HS 9404.21.00 — Mattresses: Of cellular rubber or plastics, whether or not covered (20 active orders)
  • HS 9404.29.10 — Of other materials: Of cotton (6 active orders)
  • HS 9403.20.00 — Furniture (o/than seats) of metal nesoi, o/than of a kind used in offices: Other metal furniture (8 active orders)
  • HS 9401.41.00 — Seats (other than those of heading 9402), whether or not convertible into beds, and parts thereof: Of wood (13 active orders)
  • HS 9401.49.00 — Seats nesoi, convertible into beds (o/than garden seats or camping equip.), not of wood: Other (6 active orders)
  • HS 9403.10.00 — Other furniture and parts thereof: Metal furniture of a kind used in offices (9 active orders)

Looking for the duty on a specific entry rather than the status of a code? The free Tariff Calculator stacks MFN, Section 301, Section 232 and USMCA for your origin and entry date, with citations and a dated Entry Memo.

Open the Tariff CalculatorCheck USMCA qualification